Configuring Stp - ZyXEL Communications Dimension ES-3124 User Manual

Dimension ES-3124 Ethernet Switch
LABEL
Forwarding Delay
(second)
Cost to Bridge
Port ID
Topology Changed
Times
Time Since Last Change This is the time since the spanning tree was last reconfigured.
Poll Interval(s)
Stop
10.2.1

Configuring STP

To configure STP, click the Configuration link in the Spanning Tree Protocol screen as shown next.
10-4
Table 10-3 Spanning Tree Protocol: Status
This is the time (in seconds) the root switch will wait before changing states (that is,
listening to learning to forwarding).
This is the path cost from the root port on this switch to the root switch.
This is the priority and number of the port on the switch through which this switch must
communicate with the root of the Spanning Tree.
This is the number of times the spanning tree has been reconfigured.
The text box displays how often (in seconds) this screen refreshes. You may change the
refresh interval by typing a new number in the text box and then clicking Set Interval.
Click Stop to halt STP statistic polling.
DESCRIPTION
Spanning Tree Protocol