Dimension ES-3124 Ethernet Switch
30.4.12
vlan1q svlan delentry
Syntax:
sys sw vlan1q svlan delentry <VID>
where
<VID>
=
This command deletes the specified VLAN ID entry from the static VLAN table
The following example deletes entry 2 in the static VLAN table.
ES-3124> sys sw vlan1q svlan delentry 2
30.5 vlan1q svlan active
Syntax:
sys sw vlan1q svlan active <VID>
This command enables the specified VLAN ID in the SVLAN (Static VLAN) table.
30.6 vlan1q svlan inactive
Syntax:
sys sw vlan1q svlan inactive <VID>
This command disables the specified VLAN ID in the SVLAN (Static VLAN) table.
30.7 vlan1q svlan list
Syntax:
sys sw vlan1q svlan list
This command shows the IEEE 802.1Q Tagged SVLAN (Static VLAN) table.
An example is shown next.
For the
section of the last column, "-" is a port set to normal, "X" is a forbidden port and "F" is a fixed port.
AdCtl
For the
section of the last column, "T" is a tagged port, "U" is an untagged port.
TagCtl
30-8
The VLAN ID [1 – 4094].
Figure 30-13 vlan1q svlan delentry Command Example
IEEE 802.1Q Tagged VLAN