Qualified Personnel Only - Toshiba G8000 SERIES Installation And Operation Manual

The Toshiba products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic
appliances, etc.). These Toshiba products are neither intended nor warranted for usage in equipment that
requires extraordinarily high quality and/or reliability; nor are they intended to be used in equipment that, if
a malfunction or failure occurs, may result in loss of human life or bodily injury (collectively referred to as
"Unintended Usage"). Unintended Usage includes atomic energy control instruments, airplane or spaceship
instruments, transportation instruments, traffic signal instruments, combustion control instruments, life
support equipment, all types of safety devices, etc. Unintended Usage of Toshiba products listed in this
document shall be made at the customer's own risk.
PLEASE INFORM TOSHIBA INTERNATIONAL CORPORATION OR AUTHORIZED
REPRESENTATIVE IN CASE OF INCONSISTENCIES, OMISSIONS, OR QUESTIONS.
The instructions contained in this manual are not intended to cover all of the details or variations in equipment,
nor to provide for every possible contingency concerning installation, operation, or maintenance. Should
further information be required or if problems arise which are not covered sufficiently contact your Toshiba
sales office.
The contents of this instruction manual shall not become a part of or modify any prior or existing agreement,
commitment, or relationship. The sales contract contains the entire obligation of Toshiba International
Corporation's UPS Division. The warranty contained in the contract between the parties is the sole warranty
of Toshiba International Corporation's UPS Division and any statements contained herein DO NOT create
new warranties or modify the existing warranty.
Any electrical or mechanical modifications to this equipment without prior written consent of Toshiba
International Corporation will void all warranties and may void the UL/CUL listing. Unauthorized modifications
can also result in personal injury, death, or destruction of the equipment.
Qualified Personnel is one that has the skills and knowledge relating to the construction, installation,
operation, and maintenance of the electrical equipment and has received safety training on the
hazards involved (Refer to the latest edition of NFPA 70E for additional safety requirements).
NOTICE

QUALIFIED PERSONNEL ONLY

G8000 Series Installation and Operation Manual