Dsc Operational Overview - Furuno FM-8700 Operator's Manual

2.2 DSC Operational Overview

2-4
Standby display
When the FM-8700 is turned on, the following display appears.
This display is known as the "standby display." This is where you
will begin most operations.
Watch VHF CH70
auto
[2] key pressed to get "auto" screen.
Should you get lost in operation you can return to the standby dis-
play by pressing the [CANCEL] key several times.
Selecting and registering items
The arrow keys ([t] and [s]) function to select items on the LCD.
After selecting item, press the [ENT] key to register it.
Blinking
Call type <ALL ships>
cursor
IND TEL
encloses
current
selection.
(Scrolls
screen
leftward.)
Press the [ENT] key.
When blinking question mark appears
Press the [ENT] or [SELECT] key depending on your desire.
* VHF call message *
Format ? INDIVIDUAL
If change is necessary
press the [SELECT] key.
ALL R/A ---
(Scrolls
screen
rightward.)
If no change is necessary,
press the [ENT] key.
Standby display
screen
Item selected by cursor
appears here.
Call type
selection screen
Blinking question mark
Format selection screen
(In this example it is format
for "VHF call message.")