Furuno FM-8700 Operator's Manual page 65

Operation after making DSC telephone call
Voice communication is started. After completion of communica-
tion, the display changes as shown in (1) or (2) below depending
on how voice communication was terminated.
(1) When you end voice communication by pressing the [CAN-
CEL] key or hanging the handset on the hanger of the VHF, the
display of the FM-8700 changes as follows.
Note: If a subscriber hangs the handset on the hanger to
terminate voice communication, coast station will transmit the
"End of call" command to you to break the communication
line.
PSTN CALL
* Call in progress *
END OF CALL
Transmits "End of call" command.
* Waiting for end call ack *
AUTO RELAY in 2 sec
If "End call ack" is not received
within two seconds;
* Call in progress *
AUTO RETRY
* Waiting for end call ack *
2 sec to go
If "End call ack" is received;
If not received;
* End call not received *
No charge information
(No charge time information)
Display 1
Working channel
Counts down.
If "End call ack" is
received;
* Received * END OF CALL
Charge time:
Charge time appears.
5-5