Furuno FM-8700 Operator's Manual page 43

Receiving ACK RQ with AUTO ACK OFF
After verifying contents of receive message, manually transmit the
ACK BQ signal by pressing the [CALL] key within five minutes.
If the signal is transmitted more than five minutes after reception
of ACK RQ signal, it is treated as an ACK RQ signal rather than an
ACK BQ signal.
* Received * ACK RQ
ID:
Alarm sounds. To silence, press the [ALRAM STOP] key.
Press the [ENT] key.
Communication mode
DUPLEX TP No information
Channel:
Working channel
Press the [ENT] key twice.
Acknowledge call <
ACK END NEXT DEL
Press the [ENT] key.
* Acknowledge call *
Telecom1? DUPLEX TP
Press the [ENT] key.
Channel?
If no change is necessary,
press the [ENT] key.
* Ready for calling *
ACK BQ CALL CH70
To transmit the ACK BQ signal, press
the [CALL] key.
Returns to standby display.
Other ship ID
Confirm proposal
from other station.
ACK: Transmits ACK BQ
signal.
END: Returns to normal
display.
>
NEXT: Recalls received
message.
DEL: Deletes received
message from
memory.
Communication mode
To change communication
mode, press the [SELECT]
key.
(*1)
(continued on next page)
Working channel
To change working channel, press the
[SELECT] key then enter desired
channel number followed by the
[ENT] key.
Then, communicate
with other station.
4-7