Furuno FM-8700 Operator's Manual page 70

No.
Contents of {VHF call message}
1
Contents of all transmitted logs
2
{Xmitted log No. <
Contents of specific log no. (for example,
3
log no. 1)
{Xmitted log No. <1/50>}
4
Call message (again)
Call again
CALL END...
Press the [ENT] key.
Contents of all received logs {Ordinary log
5
No. < >}
Contents of specific log no. (for example,
6
log no. 1)
{Ordinary log No. <1/50>}
(Distress)
1 Currently received message
7
* Received *
2 Acknowledge message
Acknowledge call <
Contents of currently prepared
8
{VHF call message M}
All lists of {saved message} or contents of
9
all {Address or Tel No.} files.
• Press the [SELECT] key. e
Press the [7] key.
File <
Message Address Tel No.
6-2
Manual printing
When "Manual" is selected, press the [4 (PRINT)] key to print out
message desired. Note that manual printing is available even when
"AUTO" is selected.
The contents to be printed depend on when the [4] key is pressed,
as shown in the table below.
Printing
>}
Press the [ENT] key.
(Distress)
Press the [ENT] key.
>
>
Timing of [4] key pressing
During "VHF call message" display to "Ready
for calling " display
Displayed [Xmitted log No. <
(To stop printing, press the [CANCEL] key.
During "[Xmitted...] e Press the [ENT] key."
display to "EOS" display.
Channel?
to
Ready for calling
Displayed [Ordinary log No. <
(Distress)
(To stop printing, press the [CANCEL] key.)
[Ordinary... ] display e Press the [ENT] key.
* Received *
to
ECC: OK
"Ready for calling" is displayed.
During "VHF call message M" display to
"Ready for filing " diaplay.
• For example, to print out all coast addresses
in the memory, press the [4] key at display 1
on page 5-9.
Press the [4] key to print out all list of
saved messages.
Example
Pringout
a
>]
b
c
a
While these
displays
appears
>]
d
e
While these
displays
appears
f
g
h