Confirming Tx Output Power - Furuno FM-8700 Operator's Manual

7.5 Confirming Tx Output Power

Smp power: CH60 CH40 CH88
Protected 732
Press the [HI/LOW] key
to see low Tx output power.
Smp power: CH60 CH14 CH88
Protected 102
Press the [ENT] key
to return to the screen 1.
The Tx output power on three VHF bands (low, CH60; med, CH14,
high, CH88) can be confirmed as shown below. Tx output power
on private mode channels can also be confirmed if applicable.
How to confirm Tx output power
At screen 1 on page 7-1, select "PO" and press the [ENT] key.
Then, follow the procedure below.
[ENT]
key
729 725
104 101
Appears when private
channels are registered.
Dup power: CH60 CH14 CH88
Protected
753
Press the [HI/LOW] key
to see low Tx output power.
Dup power: CH60 CH14 CH88
103
Protected
To view other channel modes,
press the [CHANNEL] key.
Tx power: Priv01/CH123
Protected HI:753 LOW:108
To escape, press the [CANCEL] key three times.
The standby display appears.
748 747
105 103
Tx output power
settings on private
channels can be
confirmed by
rotating the
[CHANNEL] control.
Power
settings
7-5