Connection To Dmc-5, Ic-302-Dsc; Preamp Setting (For Fax-5) - Furuno FS-1570 Installation Manual

3.4.3

Connection to DMC-5, IC-302-DSC

The above equipment can be connected to the DMC port at the back of the main unit. For
these units, set DIP switches as below.
DMC
Set to RS-422 as follows.
S6
#1 #2 #3 #4
ON ON ON ON
IC-302-DSC
Set to Current Loop for IC-302 connection.
S6
#1 #2 #3 #4
OFF OFF OFF OFF
3.5

Preamp Setting (For FAX-5)

When using the preamp for the watch receiver antenna, set J3 on the W/R Board to
ACTIVE in the transceiver unit.
ACTIVE
Change jumper to
ACTIVE position.
S7
#1 #2 #3 #4
OFF OFF OFF OFF
S7
#1 #2 #3 #4
ON ON ON ON
J3
J2
W/R Board, 05P0734
J4
J1
3-11