Table of Contents
Advertisement
Preparing and transmitting DSC messages
There are two methods by which you can prepare and transmit
DSC messages, and they are shown below.
Preparing message for immediate transmission
Prepare message and then transmit it as follows:
Standby display
Press the [ENT] key.
* VHF call message *
Format?
INDIVIDUAL
For how to prepare a DSC message,
refer to page 4-1.
After preparation, press the [CALL]
key to transmit the DSC message.
Transmitting a message stored in the memory
99 messages (excluding distress message) can be saved to the
memory. You may open a memory-stored message and transmit it
as follows:
Standby display
Press the [SELECT] key.
Set up menu <
1
2
3
4
6
Press the [7] key.
For how to prepare and store a message, refer to "4.5 Preparing
and Saving Messages."
After the standby display appears, press keys in the order
shown below to transmit a DSC messages.
Press the [7] key. / (Enter file number.) / Press the [CALL] key.
>
7
9 ALM
2-5
Hide quick links:
Advertisement
Table of Contents
