Confirming Vhf Section Settings - Furuno FM-8700 Operator's Manual

7.3 Confirming VHF Section Settings

Press the [CANCEL] key
to go to previous display.
You can confirm VHF section settings as shown below. To change
VHF section settings, contact FURUNO agent or dealer for ser-
vice.
How to confirm VHF section settings
At screen 1 on page 7-1, select "RT" and press the [ENT] key.
Then, follow the procedure below.
RT 1-Mode: USA/WX PRIV
protected ON
Press the [ENT] key.
RT 2-Hookworking: CH16 SP
protected
Press the [ENT] key.
RT 3-Time out timer: off
protected
Press the [ENT] key.
RT 4-Tx AF monitor: OFF
protected
Press the [ENT] key.
RT 5-Auto 1W: ON
protected
Press the [ENT] key.
RT 6-Scanning: DW SCAN
protected OFF OFF
Press the [ENT] key.
RT 7-AutoSQ: LOW HIGH HOLD
protected
00
To escape, press the [ENT] key and then press the [CANCEL]
key twice. To see VHF channels, press the [ENT] key twice.
Status (ON/OFF) of USA/WX
and PRIV channels
OFF
In on-hook state, CH16 and
speaker status appear.
ON ON
CH16: ON>Automatically switches to CH16
SP: ON>Handset is off hook: SP is OFF.
Time-out timer status
(ON/OFF)
ON: Monitors Tx AF signal
from RB-700, Wing HS, HS
and DSC.
Automatic TX power
reduction status
(ON/OFF)
Dual watch and scanning
status (ON/OFF).
Auto squelch threshold levels
for low, high and hold.
03 30
when handset is on hook.
Handset is on hook: SP is ON.
7-3