Canon JX510P User Manual page 59

Name
ACTIVITY REPORT
AUTO PRINT
TX/RX SEPARATE
TX SETTINGS
Name
ECM TX
PAUSE TIME
AUTO REDIAL
REDIAL TIMES
REDIAL INTERVAL
DIAL TONE DETECT**
* The values may differ depending on the country/region of use.
** Only available in some countries.
RX SETTINGS
Name
ECM RX
FAX/TEL AUTO SW
RING START TIME
TEL RING TIME
DEFAULT ACTION
INCOMING RING
RING COUNT
MAN/AUTO SWITCH
RING TIME
REMOTE RX
REMOTE RX ID
SAVE RX IMAGE
OPTION SETTINGS
* The values may differ depending on the country/region of use.
Description
Enable/disable automatic printing of the ACTIVITY REPORT. –
When you set ON, your fax is set to print the ACTIVITY
REPORT for every 20 transactions (sending and receiving).
Divide the activity management report into sent and received
transactions.
Description
Enable/disable error correction during transmission.
Set the length of the pause you insert into a dialing sequence. 1 to 9 seconds*
Determine whether the fax will redial a number if it fails to get
a response on the first attempt.
Set the number of retries.
Set the period of time between redialing attempts.
Set whether to send faxes after detecting the dial tone. This
function may not work correctly with some telephone lines.
Description
Enable/disable error correction during reception.
This feature is used to answer calls, and if no fax tone is
detected, the fax rings to alert you of an incoming call.
Set the duration that the fax listens for a fax tone before
starting to ring.
Set the length of time the fax will ring to alert you of an
incoming call.
Select the action taken after the TEL RING TIME expires.
Set the fax to ring when it receives a call.
Set the number of incoming rings before the fax answers.
Determine if the fax switches to document receive mode after
the fax rings for a specified time when the fax is in the manual
receive mode.
Set the amount of time the fax will ring before switching to
document receive mode.
Enable/disable remote receiving.
If you set REMOTE RX to ON, you can select the remote
receiving ID.
Set whether to save images received.
Set whether the fax prints out received documents even
when the ink level is low. Faxes will be deleted from memory
after printing. If there is no ink left, the information contained
in the fax will be lost.
This setting will be retained even if the FINE cartridge is
replaced with a new cartridge.
Settings and Activity Reports
Settings
ON/OFF
ON/OFF
Settings
ON/OFF
ON/OFF
1 to 10 times*
2 to 99 minutes
ON/OFF
Settings
ON/OFF
–
0 to 20 seconds
10 to 60 seconds*
DISCONNECT/
RECEIVE
ON/OFF
2 to 30 times*
ON/OFF
1 to 60 seconds
ON/OFF
00 to 99
ON/OFF
ON/OFF
57