Setting The Receive Mode - Canon JX510P User Manual

Setting the Receive Mode

Once you have decided which mode is suitable for your needs, set the mode by pressing [Receive
Mode/Resolution].
1
Press [Receive Mode/Resolution].
Every time you press [Receive Mode/Resolution], the mode changes cyclically.
Receiving Faxes: <FAX ONLY MODE>
Note
If paper jams, see "Troubleshooting" on page 72.
If the Ink Lamp lights up faxes will be received to memory.
Receiving Both Documents and Telephone Calls Automatically: <Fax/
Tel Mode>
If you set <Fax/Tel Mode>, you can control precisely how the fax handles incoming calls by
adjusting the following settings:
Adjust the time the fax takes to check whether a call is from a fax machine or a telephone
(<RING START TIME> setting).
Adjust the length of time the fax rings when the call is a voice call (<TEL RING TIME>
setting).
Set whether the fax switches to receive mode after the ring time set in <TEL RING TIME> has
elapsed (<DEFAULT ACTION> setting).
1
Press [Menu].
2
Use [{] or [}] to select <DATA REGSTRATION>, then press [Start/Copy]. The
LCD displays <USER SETTINGS>.
3
Use [{] or [}] to select <RX SETTINGS>, then press [Start/Copy]. The LCD
displays <ECM RX>.
4
Use [{] or [}] to select <FAX/TEL AUTO SW>, then press [Start/Copy]. The LCD
displays <RING START TIME>.
5
Press [Start/Copy].
6
Use the numeric buttons, or [{] or [}] to enter the time the fax waits before ringing
when it receives a call, then press [Start/Copy] twice.
7
Use the numeric buttons, or [{] or [}] to enter the time the fax rings while waiting
for someone to pick up the Handset, then press [Start/Copy] twice. The LCD
displays <RECEIVE>.
8SEC
22SEC
Receiving Faxes 33