Canon JX510P User Manual page 83

Hide thumbs Also See for JX510P:
Table of Contents

Advertisement

Lines Are Misaligned
Cause
The paper and print quality settings are
not set properly.
Print Head is misaligned.
Size of the print data is extremely large. Click Print Options on the Page Setup sheet. Then, select the Prevent loss of
The Printing layout printing or Binding
margin function is being used.
Paper Is Smudged / Printed Surface Is Scratched
Cause
The paper and print quality settings are
not set properly.
Printing on inappropriate type of paper.
Paper is curled.
Printing beyond the recommended
printing area.
Inside of the machine is dirty.
Printed paper is taking long to dry.
The paper is scratched by other loaded
paper.
Printing graphics with the intensity
setting set too high.
Confirm the paper and print quality settings.
See "Print Results Not Satisfactory" on page 80.
If you did not align the Print Head after installation, straight lines may be printed
misaligned.
See "Aligning the FINE Cartridge" on page 67.
print data check box in the displayed dialog.
When the Printing layout printing or Binding margin function is being used, thin
lines may not be printed. Try thickening the lines in the document.
Confirm the paper and print quality settings.
See "Print Results Not Satisfactory" on page 80.
Check to see if the paper you are printing on is suitable for your printing
purpose. See "Paper Requirements" on page 20 to make sure that the paper
you are using is suitable.
Turn the paper over and reload it to print on the other side.
Leaving the paper loaded on the Rear Tray for a long time may cause the paper
to curl. In this case, load the paper with the other side facing up. It may resolve
the problem.
We recommend putting unused paper back into the package and keeping it on a
level surface.
If you are printing beyond the recommended printing area of your printing paper,
the lower edge of the paper may become stained with ink.
Resize your original document in your application software.
For details on recommended printing area, see "Paper Requirements" on
page 20.
Perform the Bottom Plate Cleaning to clean the inside of the machine.
For details on cleaning, see "Cleaning Your Machine" on page 68.
Note
To prevent the inside of the machine from getting stained, set the page size
correctly.
Doing so gives the printed surface enough time to dry so that paper smudged
and scratched are prevented.
(1)Make sure that the machine is turned on.
(2)Open the printer properties dialog box.
Refer to the On-screen Manual.
(3)Click the Maintenance tab and then Custom Settings.
(4)Drag the Ink Drying Wait Time slide bar to set the wait time, and then click
Send.
(5)Confirm the message and click OK.
The paper may be scratched by other loaded paper when feeding from the Rear
Tray. In this case, load one sheet at a time.
If you are printing images with high intensity, the paper may absorb too much ink
and become wavy, causing paper abrasion.
Reduce the Intensity setting in the printer driver and try printing again.
(1)Open the printer properties dialog box.
Refer to the On-screen Manual.
(2)On the Main sheet, select Manual for Color/Intensity, and then click Set.
(3)Drag the Intensity slide bar on the Color Adjustment sheet to adjust the
intensity.
Action
Action
Troubleshooting
81

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fax-jx210Qt5-2227-v02Jx210p

Table of Contents