Viewing Initial Settings - Furuno FA-150 Operator's Manual

1.12

Viewing Initial Settings

The INITIAL SETTINGS menu, which is locked with a password, is where the
installer enters ship's MMSI, internal and external antenna positions, ship type
and I/O port settings. You can view the settings on this menu as follows.
1. Press the MENU to open the menu.
2. Use the CursorPad to choose INITIAL SETTINGS and then press the ENT
key.
3. Press the ENT key twice.
4. Use the CursorPad to choose item to view and then press the ENT key.
[INITIAL SETTINGS]
VIEW MMSI
VIEW INT ANT POS.
VIEW EXT ANT POS.
VIEW SHIP TYPE
VIEW I/O PORT
QUIT [MENU]
Choose port to view and
press the [ENT] key.
INITIAL SETTINGS menus
[VIEW MMSI]
MMSI : 999999999
IMO NO : 009999999
NAME : FURUNO
C. SIN : FQC3544
[VIEW INT ANT POS.]
A
B
C D
[VIEW EXT ANT POS.]
A
B
C D
[VIEW SHIP TYPE]
TYPE NO : 0
***TYPE DETAIL*****
NOT AVAILABLE
[VIEW I/O PORT]
VIEW COM PORT
VIEW PC PORT
VIEW LAN PORT*
VIEW PRIORITY
* Shown when
optional LAN
kit is installed.
1. OPERATION
QUIT [MENU]
A: 45m
B: 15m
C: 8m
D: 7m
QUIT[MENU]
A: 45m
B: 15m
C: 8m
D: 7m
QUIT[MENU]
QUIT [MENU]
QUIT [MENU]
1-35