Plotter Display - Furuno FA-150 Operator's Manual

Furuno uais transponder operator'smanual fa-150
Hide thumbs Also See for FA-150:
Table of Contents

Advertisement

1.7.1

Plotter display

The plotter display, which automatically appears at power-on, shows the range
and course of AIS-equipped ships within the current range. The position and
course of your ship are also displayed.
Target (hollow circle)
Own ship
course marker
Lost target
Display range
A target marker (hollow circle w/vector) indicates the presence of a vessel
equipped with AIS in a certain location and course. If you desire to know more
about a vessel's data, see the next paragraph.
Operations on the plotter display
1. Press the DISP key to show the plotter display.
2. Use ▼ or ▲ to choose the range. The available ranges are (in nm) 0.125,
0.25, 0.5, 0.75, 1.5, 3, 6, 12, and 24.
3. To find a target's data, see paragraph 1.7.2.
Note 1: A target is declared a lost target under the conditions shown in the
table below. A target is erased from the screen 6 minutes and 40
seconds after it is declared a lost target.
Ship's navigation status
Ship at anchor or moored and not moving faster than 3 kts 10 min
Ship at anchor or moored and moving at more than 3 kts
0-14 kt speed
0-14 kt speed with course change
14-23 kt speed
14-23 kt speed with course change
Speed higher than 23 kt
Speed higher than 23 kt with course change
Note 2: When a target's CPA and TCPA are lower than set in paragraph 1.6,
the target flashes and the audio alarm sounds (if active). Press any
key to stop the flashing and silence the audio alarm. Take suitable
measures to avoid collision.
Note 3: "DNGR" (DANGER) appears at the end of the HDG field when a
target's CPA and TCPA are lower than the CPA and TCPA alarm
settings. Further, when a target becomes a lost target, "LOST" appears
at the end of the HDG field.
Selected target
(circle filled in black)
[FURUNO]
HDG: 111°
SOG: 10kt
COG: 111°
CPA: 6.19
TCPA: 12'59
INTRD: 1
n
RNG:
6
DETAIL:[ENT]
m
Dangerous target
(Target whose CPA and TCPA are lower
than CPA and TCPA alarm settings.)
Plotter display
Target name
Heading
Speed
Course
n
CPA
m
TCPA
Number of dangerous
targets
Target declared as lost target after
50 s
50 s
50 s
25 s
25 s
7 s
7 s
1. OPERATION
Data for target
selected
1-13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents