Displaying Sensor Status - Furuno FA-150 Operator's Manual

2.8

Displaying Sensor Status

The SENSOR STATUS screen shows sensor status.
1. Press the MENU key.
2. Use the CursorPad to choose SENSOR STATUS and then press the ENT
key.
3. Press the DISP key to close the display.
Sensor Status Message
UTC CLOCK LOST
EXTRL GNSS
EXTRL DGNSS
INTRL DGNSS BEACON
INTRL DGNSS MSG 17
INTRL DGNSS
INTRL GNSS
EXTRL SOG/COG
INTRL SOG/COG
HDT VALID
ROT VALID
OTHER ROT
CH MANAGEMENT
Sensor status message
SENSOR STATUS screen
Sensor status messages and their meanings
Internal position fix lost
Using external GNSS
Using external DGNSS
Using internal DGNSS beacon
MSG 17 corrects internal GNSS with differential
correction
Using internal DGNSS
Using internal GNSS
Using external SOG/COG
Using internal SOG/COG
Heading data normal
ROT data normal
Value calculated from HDT, or ROT device used and
talker is other than T1
Channel changed (displayed about 30 s)
2. MAINTENANCE, TROUBLESHOOTING
[SENSOR STATUS]
UTC CLOCK LOST
QUIT[MENU]
Meaning
2-11