Setting Up For A Voyage - Furuno FA-150 Operator's Manual

1.5

Setting Up for a Voyage

There are seven items on the NAV STATUS menu that you will need to enter at
the start of a voyage: navigation status, destination, arrival date, arrival time,
number of crew, vessel type and draught.
1. Press the NAV STATUS key to open the NAV STATUS menu.
2. If your navigation status is different from that shown, follow the procedure
below. If it is the same as shown, go to step 3.
a) Press the ENT key.
b) Press ▲ or ▼ to choose appropriate status and then press the ENT key.
Refer to the data below to choose appropriate nav status.
00:
01:
02:
03:
04:
05:
06:
07:
08:
09:
10:
11-14: RESERVED FOR FUTURE USE
15:
3. Press ► to show page 2 of the NAV STATUS menu.
[NAV STATUS]
NAV STATUS:
***STATUS DETAIL***
UNDER WAY USING
ENGINE
NAV STATUS menu, page 1, nav status entry screen
UNDER WAY USING ENGINE
AT ANCHOR
NOT UNDER COMMAND
RESTRICTED MANEUVERABILITY
CONSTRAINED BY DRAUGHT
MOORED
AGROUND
ENGAGED IN FISHING
UNDER WAY SAILING
RESERVED FOR HIGH SPEED CRAFT (HSC)
RESERVED FOR WING IN GROUND (WIG)
NOT DEFINED (DEFAULT)
[DESTINATION]
*************
[NEW?]
NAV STATUS menu, page 2
1. OPERATION
0
(0/0)
1-7