Error Messages - Furuno FA-150 Operator's Manual

2.6

Error Messages

The FA-150 displays the following error messages to alert you to invalid data,
etc.
Message
CAN'T DISPLAY OVER LAT85°
COLLISION ALARM
COMMUNICATION ERROR
ERROR REGIST
GPS COMMUNICATION ERROR
ILLEGAL MODE WAS SELECTED.
PRESS ANY KEY.
NO MESSAGE
NO OWN SHIP POSITION
AVAILABLE
NO SEL
OUT OF RANGE!: CPA:0-6.00
OUT OF RANGE!: CREW:0-8191
OUT OF RANGE!: DAY
OUT OF RANGE!: DRAUGHT:0-25.5 Invalid draught entered in SET SHIP DATA.
OUT OF RANGE!: HOUR:0-23*
OUT OF RANGE!: INVALID
CHANNEL
OUT OF RANGE!: MINUTE:0-59*
OUT OF RANGE!: TCPA:0-60
OUT OF RANGE!: ZONE:1-8
SEND MESSAGE UNSUCCESSFUL Message could not be sent.
TRANSPONDER WAS REBOOTED
* Error message displayed for both even if only one is out of range.
2. MAINTENANCE, TROUBLESHOOTING
Error messages and their meanings
Own ship's latitude is higher than 85°.
AIS target within set CPA/TCPA range.
No communication with transponder.
In channel editing, you entered MSG22 or DSC data
whose sea areas overlap one another.
Communication error with internal GPS, shown at
internal GPS self test.
Invalid combination of channels is chosen for editing.
No TX message when you attempted to send a
message.
Invalid own ship position.
Attempted to see detailed data for a target which has
no data.
Invalid CPA range entered.
Invalid crew no. entered in SET CREW&TYPE.
Invalid day entered in SET DESTINATION.
Invalid hour entered in SET DESTINATION.
Invalid CH-NO. A or CH-NO. B entered on the EDIT
CHANNEL sub-menu.
Invalid minute entered in SET DESTINATION.
Invalid TCPA entered.
Invalid ZONE entered on the EDIT CHANNEL
sub-menu.
Transponder was rebooted.
Meaning
2-9