Furuno FA-150 Operator's Manual page 59

APPENDIX
(Continued from previous page)
CHANNEL
VIEW CHANNEL (View power and channel settings of channel in use.)
SETTINGS
EDIT CHANNEL
DIAG-
MONITOR TEST (Displays program no.; checks ROM, RAM, LCD, controls.)
NOSTICS
TRANSPONDER
TEST
PWR ON/OFF HISTORY (Log for time of equipment power on and off.)
TX ON/OFF HISTORY (Log for time of equipment transmission on and off.)
MEMORY CLEAR
FOR SERVICE (For service technician. Not accessible by user.)
[NAV STATUS] NAV STATUS (00-15)
key
DESTINATION
ARRIVAL TIME
CARGO TYPE & CREW
DRAUGHT ( 0.0 - 25.5)
AP-2
SELECT NO. ( 0 -9)
TIME
FROM MMSI (HIGH SEA, MMSI, EMPTY)
TYPE (HIGH SEA, AIS, PI, DSC,
MANUAL, EMPTY)
FROM MMSI
POWER (2W, 12.5W )
CH NO.
MODE
ZONE ( 1 -8 (nm), 5 )
CH AREA
MEMORY TEST (Displays program no.; checks ROM and RAM.)
GPS TEST (Display program no. and checks internal GPS receiver.)
MONITOR CLEAR (YES, NO )
SET USER DEFAULT (YES, NO )
GPS COLD START (YES, NO )
SELECT
EDIT
DELETE
DATE
TIME
CREW ( 0 -8191)
TYPE NO. (10-99. See page 1-8.)
Press [ENT] key to display.
CH-A, CH-B
CH-A, CH-B
RIGHT TOP
LAT
LON
LEFT BOTTOM
LAT
LON