Receiving Messages - Furuno FA-150 Operator's Manual

The screen shows message status as follows:
Message
NOW SENDING.
SEND MESSAGE COMPLETE.
PRESS ANY KEY
SEND MESSAGE UNSUCCESSFUL.
PRESS ANY KEY
SEND MESSAGE UNSUCCESSFUL.
MMSI: XXXXXXXXX
PRESS ANY KEY
NOW WAITING RESPONSE.
PRESS ANY KEY
1.8.2

Receiving messages

How to view a received message
When a message is received, the window below appears on the display. To
view the contents of the message follow the procedure below.
1. Press any key to erase the "message received" window.
2. Press the MENU key to show the main menu.
3. Choose MSG and then press the ENT key.
4. Choose RX LOG and then press the ENT key.
Date and time
message received
("NEW" displayed for
unread message)
AIS message status messages and their meanings
Message is being sent.
Transmission of message completed. (MMSI is
additionally shown in case of addressed message.)
Message could not be sent.
Message sent successfully, however there is no reply
from receiver of message.
You tried to send a message while the transponder is
awaiting receive confirmation (successful or
unsuccessful) for the first-sent message. After
confirmation is received, the next sequential message
will be sent.
MESSAGE !
PRESS ANY KEY
Message received window
[RX LOG]
03/MAY 13:25 NEW
FR : 431099111 N-ABM
28/MAR 03:43
FR: 431099111 S-ABM
22/MAR 18:00
FR: 431099111 N-ABM
1/3[ ] MSG[ENT] QUIT[MENU]
Received message log
Meaning
MMSI of sender, type of message
N-ABM: Normal, addressed binary
S-ABM: Safety, addressed binary
N-BBM: Normal, broadcast binary
S-BBM: Safety, broadcast binary
1. OPERATION
1-25