Furuno FA-150 Operator's Manual page 39

1. OPERATION
5. Press the ENT key to show details.
6. POWER is selected; press the ENT key to show the channel power
options.
7. Use ▼ or ▲ to choose power desired and then press the ENT key.
8. CH NO. CH-A is selected; press the ENT key.
9. Use the CursorPad to choose channel number for CH-A and then press
the ENT key.
10. CH NO. CH-B is selected; press the ENT key.
11. Use the CursorPad to choose channel number for CH-B and then press
the ENT key.
12. MODE CH-A is selected; press the ENT key.
13. Use the CursorPad to choose desired mode for CH-A and then press the
ENT key.
Mode
CH-A
CH-B
14. MODE CH-B is selected; press the ENT key.
15. Use the CursorPad to choose desired mode for CH-B and then press the
ENT key.
16. ZONE is selected; press the ENT key.
17. Key in the zone distance and then press the ENT key. (The setting range is
1 to 8 (nm)).
18. Use ▼ or ▲ to show page 2 of the [EDIT CHANNEL] sub menu.
1-30
[EDIT CHANNEL]
FROM MMSI: _ _ _ _ _ _ _ _ _
POWER :
CH NO.
MODE
ZONE:
EDIT CHANNEL sub-menu, page 1
1 2
TX/RX TX/RX
TX/RX RX
[EDIT CHANNEL]
CH AREA
RIGHT TOP
LAT:
LON:
LEFT BOTTOM
LAT:
LON:
EDIT CHANNEL sub-menu, page 2
1/2
12.5W
CH-A: 2087
CH-B: 2088
CH-A: TX/RX
CH-B: TX/RX
1nm
2W
12.5W
TX/RX
RX
UNUSED
3 4
RX RX
TX/RX RX
2/2
0 ° 00.0'N
0 ° 00.0'E
0 ° 00.0'N
0 ° 00.0'E
5 6
RX UNUSED
UNUSED RX