Specifications - Furuno FA-150 Operator's Manual

FURUNO
SPECIFICATIONS OF THE UAIS TRANSPONDER
1. TRANSPONDER UNIT
1.1 TX/RX Frequency
1.2 Output Power
1.3 Impedance
1.4 DSC Receiver
1.5 Bandwidth
2. MONITOR UNIT
2.1 Display
2.2 Display Size
2.3 No. of Dots
3. GPS RECEIVER
3.1 Receiving Channels
3.2 Rx Frequency/ Rx Code 1575.42 MHz, C/A code
3.3 Position Fixing System
3.4 Position Accuracy
3.5 Tracking Velocity
3.6 Position-fixing Time
3.7 Position Update Interval 1 second
3.8 DGPS Data Receiving
4. INTERFACES
4.1 COM1 – COM4
Input:
Output:
4.2 SENSOR (input)
4.3 COM4 – 6 (input)
4.4 External Beacon
4.5 PC
4.6 Alarm Output
4.7 AD-10
FA-150
156.025 MHz to 162.025 MHz
1W/ 2 W/ 12.5 W within ±1.5 db, selectable
50 ohms
CH70 fixed, 156.525 MHz, G2B, 1200 bps
25 kHz/ 12.5 kHz
4.5-inch, monochrome LCD
60 (H) x 95 (W) mm
120 x 64 dots
12 channels parallel, 12 satellites tracking
All in view, 8-state Kalman filter
Approx. 10 m, 95% of the time, (HDOP ≤ 4)
DGPS: approx. less than 5 m, 95% of the time
900 kts
Warm start: 36 seconds, Cold start: 43 seconds
RTCM SC-104 Ver 2.1 formatted
IEC 61162-1(2000-07)/61162-2(1998-09)
VSD, SSD, ABM, BBM, ACA, ACK, AIR, DTM, GBS, GGA, GLL,
GNS, HDT, LRF, LRI, OSD, RMC, ROT, VBW, VTG
VDM, VDO, ABK, ACA, ALR, TXT, LR1, LR2, LR3, LRF, LRI
Note: COM4 also functions as SENSOR input.
IEC 61162-1(2000-07)/61162-2(1998-09)
DTM, GNS, GLL, GGA, RMC, VBW, VTG, OSD, HDT, GBS, ROT
RS-232C (PC)
RS-232C
Contact closure
AD-10 format (FURUNO gyro format)
SP-1
FA-150
E4431S01C
060117