Using The Setup Menu (Home) - Integra DTR-30.4 Instruction Manual

Using the Setup Menu (Home)

Receiver
Enter
/ / /
Home
1 Press Receiver followed by Home.
2
to select "Setup", and then press Enter.
Use /
3
Use / to select a main menu item, and then press
Enter.
4
Use / to select a sub menu item, and then press
Enter.
5
Use / to select a setting target, and use
change the setting.
Press Home to close the menu.
Press Return to return to the previous menu.
Note
• This procedure can also be performed on the AV receiver by
using Setup, the cursor buttons, and Enter.
• During Audyssey 2EQ ® Room Correction and Speaker Setup,
messages, etc., that are displayed on the TV screen will appear on
the AV receiver's display.
■
Screen Saver
If there is no video signal on the current input source and
no operation for a specific time (three minutes by
Remote
default), a screen saver automatically comes on.
indicator
Tip
• The time until the screen saver activates itself can be changed
in the "Screen Saver" setting (➔ page 63).
• The screen will return to its previous state if the AV receiver is
operated.
Return
/ to
En-48
Advanced Operations
Explanatory Notes
Main Menu Speaker Setup
Speaker Configuration
■
Subwoofer
Yes
No
Main Menu
Sub Menu
Setting target
Setting options (default setting underlined)
Sub Menu
Main Menu