Playing Audio And Video From Separate Sources - Integra DTR-30.4 Instruction Manual

■
Finding Stations by Type (PTY)
You can search for radio stations by type.
1
Press RT/PTY/TP twice.
The current program type appears on the AV
receiver's display.
2
Use Preset / to select the type of program you
want.
See the table shown later in this chapter.
3 To start the search, press Enter.
The AV receiver searches until it finds a station of the
type you specified, at which point it stops briefly
before continuing with the search.
4
When a station you want to listen to is found, press
Enter.
If no stations are found, the message "Not Found"
appears.
■
Listening to Traffic News (TP)
You can search for stations that broadcast traffic news.
1 Press RT/PTY/TP three times.
If the current radio station is broadcasting TP (Traffic
Program), "[TP]" will appear on the AV receiver's
display. If "TP" without square brackets appears, this
means that the station is not broadcasting TP.
2 To locate a station that is broadcasting TP, press
Enter.
The AV receiver searches until it finds a station that's
broadcasting TP.
If no stations are found, the message "Not Found"
appears.
RDS program types (PTY)
Type Display
None None
News reports News
Current affairs Affairs
Information Info
Sport Sport
Education Educate
Drama Drama
Culture Culture
Science and technology Science
Varied Varied
Pop music Pop M
Rock music Rock M
Middle of the road music Easy M
Light classics Light M
Serious classics Classics
Other music Other M
Weather Weather
Finance Finance
Children's programmes Children
Social affairs Social
Religion Religion
Phone in Phone In
Travel Travel
Leisure Leisure
Jazz music Jazz
Country music Country
National music Nation M
Oldies music Oldies
Folk music Folk M
Documentary Document
Alarm test TEST
Alarm Alarm!
En-31
Turning On & Basic Operations
Playing Audio and Video from Separate
Sources
You can listen to the audio of one input source while
watching the video of another. This function takes
advantage of the fact that when an audio-only input source
(BD/DVD, CBL/SAT, STB/DVR, Game, PC, TV/CD)
is selected, the video input source remains unchanged. The
following procedure shows how to listen to a CD player's
audio source connected to TV/CD IN while watching a
Blu-ray Disc/DVD player's video source connected to
BD/DVD.
Tip
• To use an analog audio input as audio-exclusive, you must set
"Composite Video Input" to "- - - - -" (➔ page 51).
1
Press BD/DVD.
2 Press TV/CD.
The audio output changes to the CD source, but the
video of previously-selected BD/DVD is retained.
3 Start playback on your Blu-Ray Disc/DVD and CD
players.
You can now enjoy watching your Blu-ray Disc/DVD
with the sound of your CD player.