Controlling Other Components; Preprogrammed Remote Control Codes; Looking Up For Remote Control Codes - Integra DTR-30.4 Instruction Manual

Controlling Other
Components
You can use the AV receiver's remote controller to control
your other AV components. This section explains how to
enter the remote control code for a component that you
want to control: DVD, TV, CD, etc.
Preprogrammed Remote Control
Codes
The following Remote Mode buttons are preprogrammed
with remote control codes for controlling the components
listed. You do not need to enter a remote control code to
control these components.
For details on controlling these components, see the
indicated pages.
BD/DVD Integra/Onkyo Blu-ray Disc player
(➔ page 77)
TV/CD Integra/Onkyo CD player (➔ page 76)
STB/DVR Apple TV

Looking up for Remote Control Codes

You can look up for an appropriate remote control code
from the on-screen menu.
Note
• This can only be carried out using the on-screen menu.
1
Press Receiver followed by Home.
2
Use / to select "Setup", and then press Enter.
3
Use / to select "Remote Controller Setup", and
then press Enter.
4
Use / to select "Remote Mode Setup", and then
press Enter.
5
Use / to select a remote mode, and then press
Enter.
The menu of category selection appears.
6
Use / to select a category, and then press Enter.
The keyboard screen for brand name input appears.
7
Use / / / to select a character, and then press
Enter.
Repeat this step for the first three characters of the
brand name.
When you have entered the 3rd character, select
"Search" and press Enter.
A list of brand names is retrieved.
If the desired brand name is not found:
Use to select "Not Listed", and then press Enter.
The keyboard screen for brand name input appears.
8
Use / to select a brand, and then press Enter.
A remote control code with its instructions are
displayed. Follow the procedure.
En-74

Controlling Other Components

9
If you can control the component, use / to select
"OK", and then press Enter.
The on-screen menu returns to the "Remote Mode
Setup" front screen.
If you cannot control the component, use / to
select "Try Next Code" and press Enter.
The next code is displayed.