Integra DTR-30.3 Instruction Manual
  1. Manuals
  2. Brands
  3. Integra Manuals
  4. Receiver
  5. DTR-30.3
  6. Instruction manual

Integra DTR-30.3 Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

AV Receiver
DTR-30.3
Instruction Manual

Advertisement

Table of Contents
loading

Related Manuals for Integra DTR-30.3

Summary of Contents for Integra DTR-30.3

  • Page 1 AV Receiver DTR-30.3 Instruction Manual...

  • Page 2: Introduction

    Introduction WARNING: WARNING AVIS RISK OF ELECTRIC SHOCK RISQUE DE CHOC ELECTRIQUE TO REDUCE THE RISK OF FIRE OR ELECTRIC DO NOT OPEN NE PAS OUVRIR SHOCK, DO NOT EXPOSE THIS APPARATUS TO The lightning flash with arrowhead symbol, within an RAIN OR MOISTURE.

  • Page 3: Precautions

    Precautions For U.S. models 1. Recording Copyright—Unless it’s for personal use only, recording copyrighted material is illegal without FCC Information for User the permission of the copyright holder. CAUTION: 2. AC Fuse—The AC fuse inside the unit is not user- The user changes or modifications not expressly approved serviceable.

  • Page 4: Supplied Accessories

    Supplied Accessories Thank you for purchasing an Integra AV receiver. Please read this manual thoroughly before making connections and plugging in the unit. Make sure you have the following accessories: Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment Indoor FM antenna (➔...

  • Page 5: Table Of Contents

    Looking up for Remote Control Code ......67 Selecting the Language Entering Remote Control Codes........67 for the Onscreen Setup Menus........23 Remote Control Codes for Integra/ Playing the Connected Component......23 Onkyo Components Connected via ..... 68 Controlling Contents of USB or Network Devices ..23 Resetting Remote Mode Buttons........

  • Page 6: Features

    • Powerful and Highly Accurate 32-bit Processing DSP Connections • 6 HDMI Inputs (1 on front panel) and 1 Output • Integra/Onkyo for System Control • 4 Digital Inputs (2 Optical/2 Coaxial) • Component Video Switching (2 Inputs/1 Output) • Universal Port for the Dock for iPod ®...
  • Page 7 THX and the THX logo are trademarks of THX Ltd. which may be registered in some jurisdictions. All rights reserved. THX Select2 Plus Before any home theater component can be THX Select2 iPhone, iPod, iPod classic, iPod nano, iPod shuffle, and iPod Plus certified, it must pass a rigorous series of quality and touch are trademarks of Apple Inc., registered in the U.S.

  • Page 8: Front & Rear Panels

    Front & Rear Panels Front Panel (North American models) (Australian models) The page numbers in parentheses show where you can find the main explanation for each item. On/Standby button (22) Setup button (42) Zone 2, Off buttons (61) Tuning, Preset (28 to 28), arrow and Enter buttons Zone 2 Level buttons (61) Return button...

  • Page 9: Display

    Display For detailed information, see the pages in parentheses. Speaker/channel indicators Audio input indicators Z2 (Zone 2) indicator (61) Bi AMP indicator (15, 45) Listening mode and format indicators (34, 59) Audyssey indicator (31, 49) Dynamic EQ indicator (49) and cursor indicators (24) Dynamic Vol indicator (50) NET indicator (25, 57) Headphone indicator (41)

  • Page 10: Rear Panel

    Rear Panel DIGITAL IN COAXIAL and OPTICAL jacks Composite video and analog audio jacks (BD/DVD IN, VCR/DVR IN and OUT, CBL/SAT COMPONENT VIDEO IN and OUT jacks IN, GAME IN, PC IN, TV/CD IN) ETHERNET port MONITOR OUT V jack FM ANTENNA jack and AM ANTENNA terminal PRE OUT jacks PC IN jack...

  • Page 11: Remote Controller

    Controlling the AV Receiver To control the AV receiver, press Receiver to select Receiver mode. You can also use the remote controller to control Integra/Onkyo Blu-ray Disc/DVD player, CD player, and other components. See “Entering Remote Control Codes” for more details (➔...

  • Page 12: Connections

    Connections Connecting the AV Receiver Connecting Your Speakers Connecting the Speaker Cables The following illustration shows which speaker should be connected to each pair of terminals. If you’re using only one surround back speaker, connect it to the SURROUND BACK or FRONT HIGH L terminals. Surround Surround right...
  • Page 13 Speaker Configuration Speaker Connection Precautions The following table indicates the channels you should use Read the following before connecting your speakers: depending on the number of speakers that you have. • (North American models) You can connect speakers No matter how many speakers you use, a powered with an impedance of between 6 and 16 ohms.
  • Page 14 • Don’t connect more than one cable to each speaker terminal. Doing so may damage the AV receiver. • Don’t connect one speaker to several terminals. Using Dipole Speakers You can use dipole speakers for the surround and surround back speakers. Dipole speakers output the same sound in two directions.
  • Page 15 Bi-amping the Front Speakers Important: • When making the bi-amping connections, be sure to remove the jumper bars that link the speakers’ tweeter (high) and woofer (low) terminals. • Bi-amping can be used only with speakers that support bi- amping. Refer to your speaker manual. Bi-amping provides improved bass and treble performance.

  • Page 16: About Av Connections

    About AV Connections Connecting AV components HDMI cable Other cables : Video & Audio : Video : Audio AV receiver AV receiver Blu-ray Disc/ Blu-ray Disc/ DVD player TV, projector, etc. Game console TV, projector, etc. Game console DVD player •...

  • Page 17: Connecting Components With Hdmi

    Connecting Components with HDMI VCR or DVD recorder/Digital Video Recorder Game console TV, projector, etc. Blu-ray Disc/DVD player Personal computer Camcorder Satellite/cable set-top box, etc. Connect your components to the appropriate jacks. The default input assignments are shown below. ✔: Assignment can be changed (➔...

  • Page 18: Connecting Your Components

    Connecting Your Components The on-screen setup menus appear only on a TV that is connected to the HDMI OUT. If your TV is connected to the MONITOR OUT V or the COMPONENT VIDEO OUT, use the AV receiver’s display when changing settings. Connect your components to the appropriate jacks.
  • Page 19 Connect a turntable (MM) that has a phono preamp built-in. If your turntable (MM) doesn’t have it, you’ll need a commercially available phono preamp. If your turntable has a moving coil (MC) type cartridge, you’ll need a commercially available MC head amp or MC transformer as well as a phono preamp.

  • Page 20: Connecting Integra/Onkyo Components

    Connecting Integra/Onkyo Components Make sure that each Integra/Onkyo component is connected with an analog audio cable (connection in the hookup examples) (➔ page 18). Make the connection (see the illustration). If you’re using an RI Dock, or cassette tape deck, change the Input Display (➔...

  • Page 21: Connecting The Antennas

    Connecting the Antennas This section explains how to connect the supplied indoor FM antenna and AM loop antenna. The AV receiver won’t pick up any radio signals without any antenna connected, so you must connect the antenna to use the tuner. Caution North American models Australian models...

  • Page 22: Turning On & Basic Operations

    Turning On & Basic Operations Turning On/Off the AV Receiver On/Standby Receiver Receiver Turning On On/Standby on the front panel. Press Press Receiver followed by Receiver on the remote controller. The AV receiver comes on, the display lights. Turning Off Press On/Standby on the front panel.

  • Page 23: Playback

    Playback Controlling Contents of USB or The on-screen menus appear only on a TV that is connected to the HDMI OUT. If your TV is connected Network Devices to the MONITOR OUT V or the COMPONENT See “Controlling Other Components” about the operation VIDEO OUT, use the AV receiver’s display when of other components (➔...

  • Page 24: Understanding Icons On The Display

    Return Playing an iPod/iPhone via USB This button returns to the previous menu. This section explains how to play music/video files on the iPod/iPhone. This button fast-forwards the current song. Compatible iPod/iPhone models Made for: This button selects the next song. iPod touch (1st, 2nd, 3rd and 4th generation), iPod classic, iPod with video, iPod nano (1st, 2nd, 3rd, 4th, 5th and 6th This button stops playback.

  • Page 25: Playing A Usb Device

    Extended Mode (Video) control Listening to Internet Radio The video content information is displayed (lists are displayed), and you can control the video content while You need to connect the AV receiver to your home looking at the screen. network (➔...

  • Page 26: Playing Music Files On A Server

    Listening to Other Internet Radio Playing Music Files on a Server To listen to other internet radio stations, insert the following step after step 1 in the “Listening to vTuner You need to connect the AV receiver to your home Internet Radio”...

  • Page 27: Remote Playback

    Windows Media Player 11 Setup Using Remote Playback This section explains how to configure Windows Media Start Windows Media Player 12. Player 11 so that the AV receiver can play the music files To enable remote playback, you must first configure stored on your computer.

  • Page 28: Listening To Am/Fm Radio

    ■ Tuning into stations by frequency Listening to AM/FM Radio You can tune into AM and FM stations directly by entering the appropriate frequency. This section describes the procedure using the buttons on the front panel unless otherwise specified. On the remote controller, press Tuner repeatedly to select “AM”...
  • Page 29 ■ ■ Deleting Presets Displaying Radio Text (RT) Select the preset that you want to delete. Press RT/PTY/TP once. See the previous section. The RT information scrolls across the display. While holding down Memory, press Tuning Note Mode. • The message “Waiting” may appear while the AV receiver The preset is deleted and its number disappears from waits for the RT information.
  • Page 30 RDS program types (PTY) Type Display None None News reports News Current affairs Affairs Information Info Sport Sport Education Educate Drama Drama Culture Culture Science and technology Science Varied Varied Pop music Pop M Rock music Rock M Middle of the road music Easy M Light classics Light M...

  • Page 31: Using Basic Functions

    Using Basic Functions The distances from position must be Using the Automatic Speaker Setup at least 1 meter (3.3 ft). With the supplied calibrated microphone, ® Audyssey 2EQ automatically determines the number of speakers connected, their size for purposes of bass management, optimum crossover frequencies to the subwoofer (if present), and distances from the primary listening position.
  • Page 32 When you’ve finished making the settings, press Use / to select a target, and use to change Enter. the setting. After the results of Audyssey 2EQ have been saved, 2EQ: Auto Setup the menu will display the “Audyssey” (➔ page 49), AUDYSSEY Speakers Type (Front) Normal...
  • Page 33 Error Messages Changing the Speaker Setup Manually While Audyssey 2EQ ® Room Correction and Speaker You can manually make changes to the settings found during Audyssey 2EQ Room Correction and Speaker Setup is in progress, one of the error messages below may appear.

  • Page 34: Using The Listening Modes

    Using the Listening Modes Selecting Listening Modes See “About Listening Modes” for detailed information about the listening modes (➔ page 35). ■ Listening Mode Buttons Press Receiver first. Movie/TV, Music, Game Game Music Movie/TV Movie/TV button Game button This button selects the listening modes intended for use This button selects the listening modes intended for use with movies and TV.
  • Page 35 About Listening Modes The AV receiver’s listening modes can transform your listening room into a movie theater or concert hall, with high fidelity and stunning surround sound. ■ Explanatory Notes Front speakers Center speaker Surround speakers Surround back speakers Front high speakers Subwoofers Input Source The following audio formats are supported by the listening mode.
  • Page 36 ■ Onkyo-Original DSP Listening Modes Listening Mode Description Input Speaker Source Layout Orchestra Suitable for classical or operatic music, this mode emphasizes the surround channels in order to widen the stereo image, and simulates the natural O r c e s t r a reverberation of a large hall.
  • Page 37 Listening Mode Description Input Speaker Source Layout Dolby Pro Logic IIx Dolby Pro Logic IIx expands any 2-channel source for 7.1-channel Dolby Pro Logic II playback. It provides a very natural and seamless surround-sound experience that fully envelops the listener. As well as music and movies, video games M o v i e can also benefit from the dramatic spatial effects and vivid imaging.
  • Page 38 Listening Mode Description Input Speaker Source Layout Neo:6 This mode expands any 2-channel source for up to 7.1-channel playback. It uses seven full-bandwidth channels of matrix decoding for matrix-encoded material, providing a very natural and seamless surround sound experience that fully envelops the listener. •...
  • Page 39 Listening Mode Description Input Speaker Source Layout • Neo:6 Cinema + THX Cinema • Neo:6 Music + THX Music • Neo:6 + THX Cinema • Neo:6 + THX Music • Neo:6 + THX Games The combination of Neo:6 and THX Cinema/Music/Games modes can be used.

  • Page 40: Using The Home Menu

    Using the Home Menu Note For the Port input selector, the name of Universal Port The Home menu provides you quick access to frequently Option Dock will be displayed. used menus without having to go through the long Only when you have selected “Custom” in the “Picture standard menu.

  • Page 41: Displaying Source Information

    This section explains how to record the selected input source to a component with recording capability, and how When you connect an -capable Integra/Onkyo to record audio and video from different sources. component, you must configure the input display so that can work properly.

  • Page 42: Advanced Operations

    Advanced Operations Advanced Setup On-screen Setup Menus Common Procedures in Setup Menu The on-screen setup menus appear only on a TV that Remote indicator is connected to the HDMI OUT. If your TV is connected to the composite video MONITOR OUT V or the COMPONENT VIDEO OUT, use the AV Receiver receiver’s display when changing settings.

  • Page 43: Input/Output Assign

    ■ BD/DVD, VCR/DVR, CBL/SAT, GAME, PC, Input/Output Assign TV/CD, PORT HDMI1, HDMI2, HDMI3, HDMI4, HDMI5: Main Menu Input/Output Assign Select a corresponding HDMI input to which the video component has been connected. Monitor Out - - - - -: Select this to output composite video and component You can specify the output resolution for the HDMI OUT video sources from the HDMI OUT.

  • Page 44: Speaker Setup

    ■ Component Video Input BD/DVD, VCR/DVR, CBL/SAT, GAME, PC, AUX, TV/CD, PORT If you connect a video component to a component video COAXIAL1, COAXIAL2, OPTICAL1, input, you must assign that input to an input selector. For OPTICAL2: example, if you connect your Blu-ray Disc/DVD player to Select a corresponding digital audio input to which COMPONENT VIDEO IN 2, you must assign “IN2”...
  • Page 45 ■ ■ Speaker Impedance Center , Surround , Surround Back *2*3*4*5 (Australian models) Full Band 4ohms: 40Hz, 45Hz, 50Hz, 55Hz, 60Hz, 70Hz, 80Hz(THX), Select if the impedance of any speaker is 4 ohms or 90Hz, 100Hz, 110Hz, 120Hz, 130Hz, 150Hz, 200Hz more but less than 6.
  • Page 46 ■ Wireless Front High, Wireless Surround Back, Level Calibration Wireless Subwoofer This setting is set automatically by Audyssey 2EQ When an optional unit is connected to the page 31). UNIVERSAL PORT jack on the AV receiver, the Room Correction and Speaker Setup (➔...
  • Page 47 ■ Loudness Plus to select “Channel”, and then use to select another speaker. Repeat steps 1 and 2 for each speaker. When the “Loudness Plus” is set to “On”, it is possible to You cannot select speakers that you set to “No” enjoy even subtle nuances of audio expression at low or “None”...

  • Page 48: Audio Adjust

    Dimension Audio Adjust –3 to 0 to +3 With this setting, you can move the sound field forward or Main menu Audio Adjust backward when using the Dolby Pro Logic IIx Music With the Audio Adjust functions and settings, you can listening mode.

  • Page 49: Source Setup

    Source Setup ■ Neo:6 Music Items can be set individually for each input selector. Center Image 0 to 2 to 5 Preparation The DTS Neo:6 Music listening mode creates 6-channel Press the input selector buttons to select an input source. surround sound from 2-channel stereo sources.
  • Page 50 ■ Reference Level Note Audyssey Dynamic EQ ® Reference Level Offset • If you want to use Audyssey Dynamic EQ or Dynamic Volume 0dB: with THX listening modes, set the “Loudness Plus” setting to This should be used when listening to movies. “Off”...

  • Page 51: Name Edit

    IntelliVolume Name input area ■ IntelliVolume 4 - 4. Name Edit BD/DVD Name –12dB to 0dB to +12dB in 1 dB steps. With IntelliVolume, you can set the input level for each input selector individually. This is useful if one of your –...
  • Page 52 ■ Picture Adjust Game Mode *3*4*5 Using Picture Adjust, you can adjust the picture quality and reduce any noise appearing on the screen. If video signal delay occurs during playback on a video To view the TV picture while setting, press Enter. To component (i.e., game console), select the corresponding return to the previous screen, press Return.
  • Page 53 ■ ■ Color Temperature Fixed Mode *3*5 Warm Off: The format is detected automatically. If no digital Normal input signal is present, the corresponding analog Cool input is used instead. With this setting you can adjust the color temperature. PCM: Note Only 2-channel PCM format input signals will be •...

  • Page 54: Listening Mode Preset

    ■ DTS/DTS-ES/DTS-HD Listening Mode Preset With this setting, you can specify the listening mode used when DTS or DTS-HD High Resolution format You can assign a default listening mode to each input digital audio signals are played (DVD, LD, CD, etc.). source that will be selected automatically when you select Specifies the default listening mode for DTS-HD each input source.

  • Page 55: Hardware Setup

    Even when “On” is selected, operation details may not be 1, 2, or 3 output if the input source is connected to an HDMI IN. When several Integra/Onkyo components are used in the ■ Language same room, their remote ID codes may overlap. To...
  • Page 56 ■ Tuner HDMI Through For AM/FM tuning to work properly, you must specify the Auto: AM/FM frequency step used in your area. Note that when Detects the signal and automatically selects the input this setting is changed, all radio presets will be deleted. source.
  • Page 57 ■ Audio Return Channel Network Auto: After modifying the network settings, you must confirm The audio signal from your TV tuner can be sent to the changes by executing “Save”. the HDMI OUT of the AV receiver. The audio return channel (ARC) function allows an ARC This section explains how to configure the AV receiver’s capable TV to send the audio stream to the HDMI OUT of network settings manually.

  • Page 58: Remote Controller Setup

    Note • Perform the firmware update only when such an announcement Use / and Enter to select “Audio”, and then use is posted on the Integra web site. Visit the Integra web site for the latest information. / / / to make the desired selection.
  • Page 59 Speaker Levels Note • The effect of the Late Night function depends on the material ■ Subwoofer Level that you are playing and the intention of the original sound –15dB to 0dB to +12dB in 1 dB steps. designer, and with some material there will be little or no effect when you select the different options.

  • Page 60: Zone 2

    Zone 2 In addition to the main listening room, you can also enjoy playback in another room, which we call Zone 2. For either of the rooms, you can specify a different input source. Connecting the Zone Speakers to an Making Zone 2 Connections Additional Amplifier There are two ways you can connect Zone 2 speakers:...

  • Page 61: Controlling Zone 2 Components

    Adjusting the Volume for Zone 2 Controlling Zone 2 Components ■ ■ Operating on the remote controller Operating on the AV receiver Zone 2 Tone Press Zone2. +, – Input selector buttons Use VOL / to adjust the volume. ■ Operating on the AV receiver Use Zone 2 Level / .

  • Page 62: Using The 12V Triggers

    Using the 12V Triggers The 12V triggers A, B, and C can be used to turn on 12V trigger-capable components automatically when they are selected as the input source. The triggers can be set so that they activate when a connected component is selected as the input source for the main room, Zone 2 or any combination of rooms.

  • Page 63: Using The Remote Controller In Zone 2 And Multiroom Control Kits

    Using a Multiroom Kit with a Cabinet Using the Remote Controller in Zone 2 and Multiroom Control Kits In this setup, the IR receiver picks up the infrared signals from the remote controller and feeds them to the AV To control the AV receiver with the remote controller receiver located in the cabinet via the connecting block.

  • Page 64: Controlling Other Components

    Controlling Other Components iPod/iPhone Playback via Onkyo Dock ■ Using the Onkyo Dock Operating Notes • Functionality depends on your iPod/iPhone model and generation. The Dock is sold separately. Models sold are different • Before selecting a different input source, stop your depending on the region.

  • Page 65: Controlling Your Ipod/Iphone

    ■ Status Messages iPod/iPhone Alarm If either of the following messages is not displayed on the If you use the Alarm function on your iPod/iPhone to AV receiver’s display, check the connection to your start playback, the AV receiver will turn on at the iPod/iPhone.
  • Page 66 ✔: Available buttons Press the appropriate Remote Mode first. Onkyo Dock Buttons ✔ Top Menu ✔ ✔ / / / , Enter ✔ ✔ Playlist ✔ ✔ ✔ ✔ Repeat ✔ ✔ Random ✔ Source ✔ ✔ Display ✔ ✔ Muting ✔...

  • Page 67: Controlling Other Components

    For details on controlling these components, see the You’ll need to enter a code for each component that you indicated pages. want to control. BD/DVD Integra/Onkyo Blu-ray Disc player (➔ page 68) Look up the appropriate remote control code in the separate Remote Control Codes list.

  • Page 68: Remote Control Codes For Integra/Onkyo Components Connected Via

    (limited to Controlling Integra/Onkyo components without some models). The TV must be able to receive remote If you want to control an Integra/Onkyo component by control commands via and be connected to the pointing the remote controller directly at it, or you want to AV receiver via HDMI.
  • Page 69 ✔: Available buttons Components Press the appropriate Remote Mode first. Buttons ✔ , Input, TV VOL / , Muting ✔ ✔ ✔ Guide ✔ Top Menu ✔ ✔ ✔ ✔ ✔ / / / , Enter ✔ ✔ ✔ ✔ ✔...

  • Page 70: Appendix

    Appendix Troubleshooting ■ When the power is restored after a power If you have any trouble using the AV receiver, look for a interruption, “CHECK SP WIRE” appears on the solution in this section. If you can’t resolve the issue yourself, contact the dealer from whom you purchased this display unit.
  • Page 71 ■ Only the front speakers produce sound Depending on the input signal, some listening modes 35–39 cannot be selected. When the Stereo or Mono listening mode is selected, — only the front speakers and subwoofer produce sound. ■ Can’t get 6.1/7.1 playback In the Mono listening mode, only the front speakers output sound if the “Output Speaker”...
  • Page 72 Can’t control other components supported by the TV, no video is output from the HDMI outputs. If it’s an Integra/Onkyo component, make sure that If the message “Resolution Error” appears on the — cable and analog audio cable are connected AV receiver’s display, this indicates that your TV...

  • Page 73: Usb Device Playback

    UP-A1 Dock for iPod/iPhone Zone 2 ■ ■ There’s no sound There’s no sound Make sure your iPod/iPhone is actually playing. — Only components connected to analog inputs can be — played in Zone 2. Make sure your iPod/iPhone is properly inserted in —...
  • Page 74 ■ The following settings can be made for the Others composite video inputs ■ Standby power consumption You must use the buttons on the unit to make these settings. 18, 56, In the following cases, the power consumption in On the AV receiver, press the input selector for the standby mode may reach up to a maximum of 43 W: input source that you want to set and the button...
  • Page 75 Important Note Regarding Video Playback The AV receiver can upconvert component video and composite video sources for display on a TV connected to the HDMI OUT. However, if the picture quality of the source is poor, upconversion may make the picture worse or disappear altogether.

  • Page 76: Network/Usb Features

    Network/USB Features Connecting to the Network Network Requirements ■ The following diagram shows how you can connect the Ethernet Network AV receiver to your home network. In this example, it’s For the best results, a 100Base-TX switched Ethernet connected to a LAN port on a router, which has a 4-port network is recommended.
  • Page 77 Server Requirements USB Device Requirements ■ Server playback • USB mass storage device class (but not always guaranteed). The AV receiver can play digital music files stored on a computer or media server and supports the following • FAT16 or FAT32 file system format. technologies: •...
  • Page 78 ■ LPCM (Linear PCM) Supported Audio File Formats • Sampling rates of 8 kHz, 11.025 kHz, 12 kHz, 16 kHz, For server playback and playback from a USB device, the 22.05 kHz, 24 kHz, 32 kHz, 44.1 kHz, 48 kHz, 64 kHz, AV receiver supports the following music file formats.

  • Page 79: Firmware Update

    AV receiver off and on again. See the Integra web site for latest information. The message “Completed!” appears on the front display of the AV receiver, indicating that the update has been completed.
  • Page 80 USB device, remove it first. See the instruction manual of the router. • If your network allows only one client Download the firmware file from the Integra web connection and there is any other device site. The file name is as follows: already connected, the AV receiver will not ONKAVR****_************.zip...
  • Page 81 Others Retry the update procedure from the beginning. If the error persists, please contact Integra Support and provide the error code. Case 3: If an error occurs during the update, disconnect then reconnect the AC power cord and try again.

  • Page 82: Connection Tips And Video Signal Path

    Connection Tips and Video Signal Path The AV receiver supports several connection formats for compatibility with a wide range of AV equipment. The format you choose will depend on the formats supported by your components. Use the following sections as a guide. The on-screen setup menus appear only on a TV that is connected to the HDMI OUT.
  • Page 83 Audio Connection Formats Audio components can be connected by using any of the Audio Signal Flow Chart following audio connection formats: analog, optical, coaxial, Blu-ray Disc/DVD player, etc. or HDMI. When choosing a connection format, bear in mind that the Analog Optical Coaxial...

  • Page 84: About Hdmi

    About HDMI Designed to meet the increased demands of digital TV, HDMI (High Definition Multimedia Interface) is a new digital interface standard for connecting TVs, projectors, Blu-ray Disc/DVD players, set-top boxes, and other video components. Until now, several separate video and audio cables have been required to connect AV components. With HDMI, a single cable can carry control signals, digital video, and up to eight channels of digital audio (2-channel PCM, multichannel digital audio, and multichannel PCM).

  • Page 85: Using An Rihd-Compatible Tv, Player, Or Recorder

    , which stands for Remote Interactive over HDMI, is the name of the system control function found on Integra/Onkyo components. The AV receiver can be used with CEC (Consumer Electronics Control), which allows system control over HDMI and is part of the HDMI standard. CEC provides interoperability between various components, however, operation with components other than -compatible components cannot be guaranteed.
  • Page 86 ■ How to connect and setup Confirm the settings. 1. Turn on the power for all connected components. Confirm the connecting and setting. 2. Turn off the power of the TV, and confirm that 1. Connect the HDMI OUT jack to the HDMI input the power of the connected components is turned jack of the TV.

  • Page 87: Specifications

    Specifications Amplifier Section General Rated Output Power Power Supply (North American) All channels: (North American) AC 120 V, 60 Hz 100 watts minimum continuous power (Australian) AC 220 - 240 V, 50/60 Hz per channel, 8 ohm loads, 2 channels Power Consumption (North American) 6.2 A driven from 20 Hz to 20 kHz, with a...

  • Page 88: Video Resolution Chart

    Video Resolution Chart The following tables show how video signals at different resolutions are output by the AV receiver. NTSC/PAL ✔: Output Output HDMI Input 1080p/24 1080p 1080i 720p 480p/576p 480i/576i ✔ ✔ ✔ HDMI 1080p ✔ ✔ ✔ ✔ ✔...
  • Page 89 Memo...
  • Page 90 Memo...
  • Page 91 Memo...
  • Page 92 Integra Division of ONKYO U.S.A. CORPORATION 18 park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 800-225-1946, 201-818-9200 Fax: 201-785-2650 http://www.integrahometheater.com Integra Division of ONKYO EUROPE ELECTRONICS GmbH Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY Tel: +49-8142-4401-0 Fax: +49-8142-4401-555 http://www.eu.onkyo.com/ Integra Division of ONKYO CHINA PRC 1301, 555 Tower, No.555 West NanJin Road, Jin an, Shanghai,...

This manual is also suitable for:

Dtr-20.3

Table of Contents