Integra DTR-30.4 Instruction Manual page 59

Name Edit
You can enter a custom name for each individual input
selector and radio preset for easy identification. When
entered, the custom name will appear on the display.
The custom name is edited using the keyboard screen.
■
Name
1
Use / / / to select a character, and then
press Enter.
Repeat this step to enter up to 10 characters.
2
To store a name when you're done, be sure to
select "OK" by using / / / , and then press
Enter.
Name input area
4 - 4. Name Edit
Name
a b c d e f g h i
n o p q r s t u v
1 2 3 4 5 6 7 8 9
, . / ; : @ [ ]
Shift Back Space
+10 Shift
A B C D E F G H I
N O P Q R S T U V
( )
! ˝ # $ % & '
< > ? + ` { }
Shift Back Space
+10 Shift
Space:
Enters a space character.
Shift :
*1
Toggles between lower and upper case characters.
(Left)/
Moves the cursor left or right in the Name input
area.
Back Space
Moves the cursor backward and deletes one
character.
OK:
Confirms your entry.
Tip
*1 This can also be performed by using +10 on the remote
controller.
*2 Press CLR on the remote controller to delete all the
characters you have input.
BD/DVD
Tip
j k l m
• To name a radio preset, select AM or FM, and then select the
w x y z
0 – ^ \
preset (➔ page 30).
Space
• To restore a name to its default, erase all characters with CLR,
OK
select "OK" and then press Enter.
CLR All Erase
Note
• This setting cannot be used for the NET and USB input selectors.
J K L M
W X Y Z
_ = ˜ |
Space
OK
CLR All Erase
(Right):
*2 :
En-59
Advanced Operations
Picture Adjust
Using Picture Adjust, you can adjust the picture quality
and reduce any noise appearing on the screen.
To view the TV picture while setting, press Enter. To
return to the previous screen, press Return.
■
Wide Mode
*1*6
This setting determines the aspect ratio.
4:3:
Full:
Zoom:
Wide Zoom:
Auto:
According to the input signals and monitor output
setting, the AV receiver automatically selects the
"4:3", "Full", "Zoom" or "Wide Zoom" mode. See
"Monitor Out" for details on the monitor output
setting (➔ page 50).