Advanced Setup; Setup Menu - Integra DRX-7.1 Basic Manual

> Specifications > Advanced Setup
The unit allows you to configure advanced settings to provide you with an even better
experience.
Operation:
Use the on-screen displays (OSD) that appear on the TV to make the settings.
Press on the remote controller to display the Setup menu.
Setup
1. Input/Output Assign
2. Speaker
3. Audio Adjust
4. Source
5. Listening Mode Preset
6. Hardware
7. Multi Zone
8. Miscellaneous
Select the item with the cursor /
confirm your selection.
Use the cursors / to change the default values.
• To return to the previous screen, press
• To exit the settings, press .
> Listening Modes > Network Functions

Setup Menu

1. TV Out / OSD
2. HDMI Input
3. Video Input
4. Digital Audio Input
5. Analog Audio Input
buttons of the remote controller and press Enter to
.
1. Input/Output Assign
Make settings related to output to the TV, change the settings for jack allocations to the
various input selectors, and set the feature for displaying operations on the TV (OSD), etc.
■ 1. TV Out / OSD
Setting Item Default Value
HDMI Out MAIN
Dolby Vision MAIN
> Basic Manual
Troubleshooting | Supplementary Information, etc.
Setting Details
Select the HDMI jack to be connected with the TV.
"MAIN": When connecting the TV to the HDMI OUT
MAIN jack
"SUB": When connecting the TV to the HDMI OUT
SUB jack
"MAIN+SUB": When connecting to both the MAIN
and SUB jacks
If you want to output the Dolby Vision video from
the player to a TV that supports Dolby Vision,
select the HDMI OUT jack, MAIN or SUB, to which
you have connected the TV that supports Dolby
Vision. This setting is only necessary if you have
set "HDMI Out" to "MAIN+SUB" and you have
connected a TV to both the MAIN and SUB jacks.
"MAIN": To output Dolby Vision video to a TV that
supports Dolby Vision that is connected to the
HDMI OUT MAIN jack
"SUB": To output Dolby Vision video to a TV that
supports Dolby Vision that is connected to the
HDMI OUT SUB jack
• If you select "MAIN" or "SUB" but the video on
the TV does not appear correctly, set this to
"Off".
• If "ZONE 2 HDMI" is set to "Use" and a
television that supports Dolby Vision is
connected in the separate room (Zone 2), then
if this setting is set to "SUB", Dolby Vision video
is output to the television in the separate room
only if the same input is selected in the main
room and the separate room.
7