Advanced Operations; Advanced Setup; On-Screen Setup Menus; Common Procedures In Setup Menu - Integra DTR-40.2 Instruction Manual

Advanced Operations

Advanced Setup

On-screen Setup Menus

The on-screen setup menus appear only on a TV that
is connected to the HDMI output. If your TV is con-
nected to the MONITOR OUT V, MONITOR OUT S
or the COMPONENT VIDEO MONITOR OUT, use
the AV receiver's display when changing settings.
This manual describes the procedure using the
remote controller unless otherwise specified.
MENU
a 1. Input/Output Assign
2. Speaker Setup
b
c 3. Audio Adjust
4. Source Setup
d
e 5. Listening Mode Preset
6. Miscellaneous
f
7. Hardware Setup
g
h 8. Remote Controller Setup
9. Lock Setup
i
a Input/Output Assign
(➔ 48)
1. Input/Output Assign
1. Monitor Out
2. HDMI Input
3. Component Video Input
4. Digital Audio Input
5. Analog Audio Input
b Speaker Setup
(➔ 50)
2. Speaker Setup
1. Speaker Settings
2. Speaker Configuration
3. Speaker Distance
4. Level Calibration
5. Equalizer Settings
6. THX Audio Setup
c Audio Adjust
(➔ 54)
3. Audio Adjust
1. Multiplex/Mono
2. Dolby
3. DTS
4. Audyssey DSX
5. Theater-Dimensional
6. LFE Level
d Source Setup 55)
(➔
4. Source Setup
1. Audyssey
2. IntelliVolume
3. A/V Sync
4. Name Edit
5. Picture Adjust
e Listening Mode Preset
59)
(➔
5. Listening Mode Preset
1. BD/DVD
2. VCR/DVR
3. CBL/SAT
4. GAME
5. PC
6. AUX
f Miscellaneous
(➔ 60)
6. Miscellaneous
1. Volume Setup
2. OSD Setup
3. 12V Trigger A Setup
4. 12V Trigger B Setup
5. 12V Trigger C Setup
g Hardware Setup
(➔ 60)
7. Hardware Setup
1. Remote ID
2. Multi Zone
3. Tuner
4. HDMI
5. Auto Power Down
6. Network
7. Firmware Update
h Remote Controller
Setup (➔ 87)
8. Remote Controller Setup
1. Remote Mode Setup
i Lock Setup 63)
(➔
9. Lock Setup
Setup

Common Procedures in Setup Menu

Enter
q/w/e/r
Setup
The on-screen setup menus appear on the connected TV
and provide a convenient way to change the AV receiver's
various settings. Settings are organized into 9 categories
on the main menu.
Carry out the settings by using the on-screen display.
1
Press Receiver followed by Setup.
The following menu appears.
MENU
1. Input/Output Assign
2. Speaker Setup
3. Audio Adjust
4. Source Setup
5. Listening Mode Preset
6. Miscellaneous
7. Hardware Setup
8. Remote Controller Setup
9. Lock Setup
Tip
• If the main menu doesn't appear, make sure the appropri-
ate external input is selected on your TV.
2
Use q/w to select a menu, and then press Enter.
3
Use q/w to select target and then press Enter.
4
Use q/w to select option and use e/r to change
the setting.
Press Setup to close the menu.
Press Return to return to the previous menu.
Note
• This procedure can also be performed on the AV receiver by
using Setup, arrow buttons, and Enter.
• During Audyssey MultEQ ® Room Correction and Speaker
Setup, messages, etc., that are displayed on the TV screen will
appear in the Display.
Receiver
Return
En
47