Check The Access Point System Information - TRENDnet TEW-750DAP User Manual

TRENDnet User's Guide

Check the access point system information

Status > Device Information
You may want to check the system information of your access point such as IP address
settings, access point mode, wireless and wired network settings, access point wireless
MAC addresses, and firmware version.
1. Log into your access point management page (see
management page" on page 11).
2. Click on Status and click on Device Information.
System Information
• Time: The current time set on your access point.
• System Up Time – The duration your access point has been running continuously
without a restart/power cycle (hard or soft reboot) or reset.
• Firmware Version – The current firmware version your access point is running.
© Copyright 2013 TRENDnet. All Rights Reserved.
"Access your access point
Ethernet Information
• Connection Type: Displays IP address connection type.
• MAC Address: Displays the current Ethernet wired interface MAC address.
• IP Address – The current IP address settings assigned to your access point.
• Subnet Mask - The current subnet mask assigned to your access point.
• Default Gateway – The current gateway assigned to your access point.
• Primary/Secondary DNS (Domain Name System) Server – The current DNS
address(es) assigned to your access point.
TEW-750DAP
50