Check System Information; Check Connected Wireless Clients; Ipv6 Status - TRENDnet TEW-821DAP User Manual

TRENDnet User's Guide
 Target: Enter the IP address to conduct traceroute test
 Traceroute: Click to start traceroute test

Check system information

Status > Main
1. Log into your management page (see
2. Click on the Status tab and click Main.
3. Review the device information.
System
 Device Name: Displays the assigned device name
 Firmware Version: Displays the firmware version currently loaded on the router
 System Time: Displays the current time of the device
 System Up Time: Displays the time duration of how long the device has been
running
Network
 MAC Address: Displays the device's MAC address
 IP Address: Displays the assigned IP address
© Copyright 2015 TRENDnet. All Rights Reserved.
"Access the management page" on page 16).
 Subnet Mask: Displays the subnet mask of the device
 Default Gateway: Displays the default gateway of the device
 Primary/Secondary DNS: Displays the DNS IP address of the device
Wireless
 Operation Mode: Displays the current operating mode for each wireless band
 Wireless Mode: Displays the wireless mode set on each wireless band
 Channel Width: Displays the applied channel width
 Frequency (Channel): Displays the current operating wireless channel
 Tx/Rx Packets: Displays the Transmit (Tx) and Receive (Rx) packet rate
 SSID List: Displays the multiple SSID settings.

Check connected wireless clients

Status > 2.4GHz/5GHz Wireless Client
1. Log into your management page (see
2. Click on the Status tab and click Wireless Client List.

IPv6 Status

Status > IPv6 Status
1. Log into your management page (see
TEW-821DAP
"Access the management page" on page 16).
"Access the management page" on page 16).
33