TRENDnet TEW-750DAP User Manual page 20

TRENDnet User's Guide
PIN (Personal Identification Number)
Wireless > Wi-Fi Protected Setup
If your wireless device has WPS PIN (typically an 8-digit code printed on the wireless
device product label or located in the wireless device wireless software utility), you can
use this method.
1. Log into your access point management page (see
management page" on page 11).
2. Click on Wireless, and click on Wi-Fi Protected Setup.
3. To add a wireless device to your network, click the Connect button in the access point
management page.
4. Make sure Auto is selected and click Next.
© Copyright 2013 TRENDnet. All Rights Reserved.
"Access your access point
5. Select PIN and enter the 8-digit numeric PIN number of the wireless client device and
click Connect.
Note: You may need to initiate the WPS PIN on your wireless device first when using this
method. Refer to your wireless device documentation for details on the operation of
WPS.
6. Wait for your access point to finsh the WPS process.
7. If successful, you will receive the message below. Click on Wireless Status to view the
information about the current wireless client devices connected to your access point.
TEW-750DAP
17