TRENDnet User's Guide
Access Point Maintenance & Monitoring
Reset your Access Point to factory defaults
Tools > Restart
You may want to reset your access point to factory defaults if you are encountering
difficulties with your access point and have attempted all other troubleshooting. Before
you reset your access point to defaults, if possible, you should backup your access point
configuration first, see
"Backup and restore your access point configuration settings"
page 47.
There are two methods that can be used to reset your access point to factory defaults.
• Reset Button – Located on the rear panel of your access point, see
Hardware
Features" on page 2. Use this method if you are encountering
difficulties with accessing your access point management page.
OR
• Access Point Management Page
1. Log into your access point management page (see
management
page" on page 11).
2. Click on Tools and click on Restart.
3. Next to Restore to Factory Default Settings, click Restore to Factory Defaults. When
prompted to confirm this action, click OK.
© Copyright 2013 TRENDnet. All Rights Reserved.
on
"Product
"Access your access point
Access Point Default Settings
Administrator User Name
Administrator Password
Access Point Default URL
Access Point IP Address
Access Point Subnet Mask
Mode
Wireless 2.4GHz & 5GHz
Wireless 2.4GHz Network
Name/Encryption
Wireless 2.4GHz & 5GHz Multiple SSID
TEW-750DAP
admin
Admin
http://tew-750dap
192.168.10.100
255.255.255.0
Access Point
Enabled
Please refer to sticker or
device label
Disabled
46