TRENDnet TEW-750DAP User Manual page 9

N600 dual band wireless access point
Hide thumbs Also See for TEW-750DAP:
Table of Contents

Advertisement

TRENDnet User's Guide
6. Select Access Point and then click Next.
7. For added security, we have pre-encrypted each TEW-750DAP with a unique Wi-Fi
Name (SSID) and Wi-Fi Key. You can find these pre-configured settings on the labels at
the front and back of the TEW-750DAP. You will use this information to connect
wirelessly to the access point. To change the Wi-Fi key, please refer to
Wireless Network
on page 13. If the access point is reset, the Wi-Fi Key and Wi-Fi Name
will also reset to factory defaults click Next.
© Copyright 2013 TRENDnet. All Rights Reserved.
8. Please wait while the settings are being applied. Setup is complete. Connect the
access point to your router and connect your network ready devices to the access
point's LAN ports.
Note: To configure additional modes, please refer to the
page 9.
Secure your
TEW-750DAP
Choosing your device mode
on
6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents