TEW-750DAP
TRENDnet User's Guide
Allow/deny multicast streaming
Access > Advanced Network
In some cases, applications require multicast communication (also called IP multicast
which is the delivery of information to a specific group of computers or devices in a
single transmission) typically used in media streaming applications.
1. Log into your access point management page (see
"Access your access point
management
page" on page 11).
2. Click on Access, and click on Advanced Network.
3. Under Enable IPv4 Multicast Streams next to Wireless Enhanced Mode, check the
option to enable or uncheck to disable.
4. To save changes, click Save Settings.
Note: If you would like to discard the changes, click Don't Save Settings.
© Copyright 2013 TRENDnet. All Rights Reserved.
20