TRENDnet TEW-750DAP User Manual page 32

N600 dual band wireless access point
Hide thumbs Also See for TEW-750DAP:
Table of Contents

Advertisement

TRENDnet User's Guide
4. Next to Wireless Network Name, enter the wireless network name (SSID).
(ex. TRENDnet750_2.4GHz)
5. Click the Wireless Channel drop-down list and select a specific wireless channel.
(ex. 2.462GHz - CH 11)
6. Under the WDS section, next to Remote AP MAC Address1, enter the wireless MAC
address of the remote WDS supported access point or router.
Note: Based on the example, enter the remote 2.4GHz wireless MAC address of AP2.
(00:11:22:AA:BB:C3)
Note: You can also use the site survey option to scan for your remote WDS supported
device broadcasting (AP or WDS+AP), then select and connect to copy the wireless MAC
addresses of your other WDS supported devices. This simplifies the process of having to
write down the wireless MAC addresses of all devices and manually enter.
7. Configure the wireless security settings and wireless key.
Note: Please refer to page 12
"Wireless Networking and
configuring wireless security settings.
8. Click Save Settings.
Note: If you would like to discard the changes, click Don't Save Settings.
© Copyright 2013 TRENDnet. All Rights Reserved.
Security" for details on
AP2 Configuration
1. Log into your access point management page (see
management
page" on page 11).
2. Click on Wireless, click on Basic and scroll down to Wireless Network Settings -
(2.4GHz or 5GHz). Note: For this example, 2.4GHz band will be used which also matches
the band used for AP1.
3. Click the Device Operation Mode drop-down list and select one of following WDS
options. Note: WDS or WDS+AP modes can work with each other between WDS support
devices.
WDS – Select this option to establish wireless bridging only without
broadcasting your wireless network name for client devices to connect. Please
refer to the section
Wireless Bridge (WDS) Mode
mode.
WDS+AP (Recommended) – Select this option to establish wireless bridging and
broadcast your wireless network name for client devices to connect
simultaneously. Please refer to the section
Point (AP)
Mode on page 23 for details on this mode.
TEW-750DAP
"Access your access point
page 21 for details on this
Wireless Bridge (WDS) with Access
29

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents