Set The Device To Client Bridge Mode; Using Client Bridge Mode - TRENDnet TEW-750DAP User Manual

TRENDnet User's Guide

Set the device to client bridge mode

Main > Device Mode
1. Log into your access point management page (see
management page" on page 11).
2. Click on Main, click on Device Mode.
3. Click the Device Operation Mode drop-down list and select Client Bridge.
4. To save changes, click Save Settings.
Note: If you would like to discard the changes, click Don't Save Settings.
© Copyright 2013 TRENDnet. All Rights Reserved.
"Access your access point

Using client bridge mode

Wireless > Site Survey
1. Log into your access point management page (see
management page" on page 11).
2. Click on Wireless and click on Site Survey.
3. Search for your wireless network to connect to in the wireless network list. In the
Select column, click the radio button to select your wireless network.
4. At the bottom, click Connect to connect to the selected wireless network.
Note: If you are unable to find your wireless network in the list, you can click Refresh to
rescan for the available wireless networks.
TEW-750DAP
"Access your access point
36