Set Your Access Point Date And Time - TRENDnet TEW-750DAP User Manual

TRENDnet User's Guide

Set your access point date and time

Main > Time
1. Log into your access point management page (see
management page" on page 11).
2. Click on Main, and click on Time.
3. Review the Time settings. Click Save Settings to save settings.
• Time: Displays the current device time and date information.
• Time Zone – Click the drop-down list and select your time zone.
• Enable Daylight Saving: Check the option to enable daylight savings time and set
the annual range when daylight saving is activated.
• Automatically synchronize with Internet Time Server – Check the optionerver
option to set your access point date and time to synchronize with an NTP
(Network Time Protocol) server address (e.g. pool.ntp.org). Enter the NTP server
address next to Default NTP server, (e.g. pool.ntp.org). Click the Time Zone drop-
© Copyright 2013 TRENDnet. All Rights Reserved.
"Access your access point
down list to select the appropriate zone and you can optionally change your NTP
Sync period.
Note: NTP servers are used for computers and other network devices to
synchronize time across an entire network.
• Manually set time – Set your access point date and time manually in the Date
and Time Settings section. Note: Time is specified in 24-hour format. In addition,
you can click Synchronize with Your Computer's Time Settings to copy the time
and date settings from your computer.
TEW-750DAP
44