Completing The Task - Fujitsu PRIMERGY RX900 S1 Maintenance Manual

6.4.13 Completing the task

Ê Perform the following procedures to complete the task:
1. Insert all HDD/SSD modules, see
page 82 and
I
Make sure that you reinstall the module in the bay it was located
before the SAS backplane replacement.
2. Insert all CPUMEMRs, see
page 186
I
Make sure that you reinstall the CPUMEMR in the slot it was
located before the SAS backplane replacement.
3. "Closing the server" on page 47
4. "Mounting the server in the rack" on page 49
5. "Bringing the server back to operation" on page 51
6. "Closing the rack door" on page 51
RX900 S1
"Inserting the HDD/SSD module" on page
"Inserting the CPUMEMR in the slot" on
Maintenance Manual
Hard disk and solid state drives
"Unlocking the HDD/SSD module" on
83.
99