Table of Contents
Advertisement
Power supply
5.1.5
Connecting the power cord
Figure 13: Connecting the power cord and the ferrite core
Ê Thread the cable through the cable strap.
Ê Pull the cable strap tight to secure the power cord.
Ê Connect the newly installed power supply unit to the mains.
Ê Check whether the power supply unit works properly.
The PSU works properly when the indicator (1) in
more information see „PRIMERGY RX900 S1 Server - Operating manual".
56
Maintenance Manual
figure 14
lights green. For
RX900 S1
Advertisement
Table of Contents
