Removing The Rear Cover - Fujitsu PRIMERGY RX900 S1 Maintenance Manual

Basic procedures
Ê Loosen the captive screw on the cover (see circle).
Ê Push the front cover back by approximately 1 cm.
Ê Remove the front cover by lifting it upward.
4.5.2

Removing the rear cover

Figure 7: Removing the rear cover
Ê Loosen the captive screws on the rear cover (see circle).
Ê Push the rear cover back by approximately 1 cm.
Ê Remove the cover by lifting it upward.
46 Maintenance Manual
RX900 S1