Table of Contents
Advertisement
Figure 62: Removing the SFP+ transceiver
Ê Pull the SFP+ transceiver module out of its socket connector.
Ê Reattach the protective optical port plug to the transceiver optical bores.
I
Place the removed SFP+ transceiver module in an antistatic bag or
other protective environment.
8.3.3
Completing the task
Ê Perform the following procedure to complete the task:
–
"Installing SFP+ transceiver modules" on page 114
RX900 S1
Maintenance Manual
Expansion cards and BBU
123
Advertisement
Table of Contents
