Completing The Task - Fujitsu PRIMERGY RX900 S1 Maintenance Manual

Baseboard
Figure 170: Installing the TPM board
Ê Place the TPM board on the metal spacer (A) and socket (B) in
and fasten it with the Phillips screw.

14.4.4 Completing the task

Ê Perform the following procedures to complete the task:
1. Install the PCI Riser, see
2. "Closing the server" on page 47
3. "Mounting the server in the rack" on page 49
4. "Bringing the server back to operation" on page 51
5. "Closing the rack door" on page 51
272
"Expansion cards and BBU" on page 105
Maintenance Manual
figure 169
RX900 S1