Fujitsu PRIMERGY RX900 S1 Maintenance Manual page 290

Baseboard
7. Install all CPUMEMRs, see
I
Make sure that you reinstall each CPUMEMR in the slot it was
located before the replacement.
8. Install all PSUs, see
9. "Closing the server" on page 47
10. "Mounting the server in the rack" on page 49
11. "Bringing the server back to operation" on page 51
12. "Closing the rack door" on page 51
Ê Verify the settings on the new baseboard, see the "Baseboard D3081,
CPUMEMR D3131, PCIR D3082 for PRIMERGY RX900 S1 Technical
Manual" for a detailed description.
290
"Removing the CPUMEMR" on page 190
"Installing a power supply unit" on page 55
Maintenance Manual
RX900 S1