Cleaning The Card Cage Fan Assembly
1. Cabinet Models: Remove the paper guide assembly (page 348).
Pedestal Model: Remove the top cover assembly (page 327).
2. Vacuum the card cage fan assembly and surrounding areas to remove paper particles, dust, and lint. (See Figure 55.)
3. Cabinet Models: Install the paper guide assembly (page 348).
Pedestal Model: Install the top cover assembly (page 327).
4. Install the ribbon.
5. Close the printer cover.
6. Connect the AC power cord to the power source.
NOTE: Cabinet model shown.
Procedure is the same for
pedestal model.
Figure 55. This figure points out the card cage fan assembly for cleaning.
Card Cage Fan
436