Paper Scale Alignment (Figure 26)
1. Open the printer cover.
2. Load paper.
3. Connect the power cord to the AC power source.
4. Set the printer power switch to 1 (on).
5. Verify that the shuttle cover (1) is properly installed (page 326).
6. Print a full 136 column line by selecting and running one of the operator print tests (page 213).
7. Check alignment of the scale to the print at column positions 1 and 136.
8. If adjustment is necessary, loosen the three button-head 5/64 inch hex screws (2).
9. Position the scale (3) so that column positions 1 and 136 line up with the first and last characters on the 136 character
printout.
10. Tighten the 5/64 inch button-head screws (2).
11. Close the printer cover.
1
Legend:
1)
Shuttle Cover
2)
Screw, Button-Head, 5/64 inch hex (3)
3)
Paper Scale
Figure 26. This figure shows how to adjust the paper scale.
3
2
Paper Scale Alignment (Figure 26)
373