Interrupt Mode - Kyocera TASKalfa 620 Operation Manual

Interrupt Mode

Interrupt copying is useful to pause one copy job and
copy other originals with different copy settings. After
you complete the urgent job, you can resume the
interrupted copy job with the settings as they were.
Follow the steps as below to use interrupt copying.
1 Press the Interrupt key.
Interrupt Mode OK will be displayed.
2
Temporarily remove the originals for the current job.
3
Place the originals for the interrupt job in the document
processor or on the platen.
4 Specify the copy settings for the interrupt job and press
the Start key.
5
After the interrupt job is completed, remove the originals and press the Interrupt key.
The previous settings will be restored.
6 Place the previous originals in the document processor or on the platen and press the Start key.
Basic Operation
3-17