Kyocera TASKalfa 620 Operation Manual page 95

Error Messages
Now restoring stored data
in HDD.
(Please wait. Now
maintaining stored data.)
The waste toner box
almost full. Call service.
(The waste toner container
is almost full. Call service.)
The waste toner box is full.
Call service.
(The waste toner container
is full. Call service.)
Check the waste punch
box.
(Check Punch Hole box.)
Out of staples. Add
staples.
(Stapler empty. Add
staples.)
Time for maintenance.
Paper misfeed. Remove
paper.
Open cassette #, check
and remove paper from
inside of the machine.
(Open cassette #, check
and remove paper from
inside of machine.)
Remove paper from inner
tray of Finisher.
Staple jam. Remove
staples.
(Staple jam. Remove
staple(s).)
Call service.
Checkpoints
—
—
Is the container for hole punch waste
paper in the optional document
finisher full?
Is the optional document finisher out
of staples?
—
—
Is there a paper jam in the cassette?
Is there any paper left in the optional
document finisher?
Is a staple jammed in the optional
document finisher?
Is this message displayed even after
opening and closing the front cover?
Corrective Actions
Performing hard disk maintenance.
Wait until the process is completed.
Contact your Service Representative
or Authorized Service Center.
Refer to the document finisher
Operation Guide and dispose of the
punch waste paper in the box.
Refer to the document finisher
Operation Guide and replace the
staple cartridge.
Periodic maintenance is required to
keep your copier in good condition.
Contact your Service Representative
or Authorized Service Center
promptly.
If a paper jam occurs, the location of
the jam will be indicated on the touch
panel and the copier will stop. Leave
the copier on ( position) and follow
the instruction to remove the jammed
paper.
Remove any jammed paper from the
cassette.
Remove all paper left in the document
finisher.
Refer to the document finisher
Operation Guide and remove the
jammed staple.
Make a note of this message (C
followed by a number), turn off the
copier ( position), unplug the power
cord, and contact your Service
Representative or Authorized Service
Center.
Troubleshooting
Reference
Page
—
—
—
—
—
page 6-9
page 6-9
—
—
—
6-7