Kyocera TASKalfa 620 Operation Manual page 93

Error Messages
Reposition original.
Check paper size. Copy
paper is not the same size
as original.
(Paper size in cassette
differs from actual size.
Check paper size in
cassette.)
Reposition original or
change cassette.
(Reset original or select
another paper cassette.)
Reset originals in
processor.
Reset all originals in
processor.
(Reset originals in
processor.)
Reset all originals in
Document Processor.
(Reset originals in
Document Processor.)
Cannot copy this media
type.
Cannot staple this media
type.
Cannot punch this media
type.
Cannot offset this paper
size.
(Cannot group this paper
size.)
Cannot staple this size.
(Cannot staple this paper
size.)
Cannot punch this size.
(Cannot punch this paper
size.)
Cannot staple.
##: maximum capacity
(Staple)
(Cannot staple.
##: Max. staples)
Checkpoints
Is the orientation of the specified
paper different from that of the
original?
Is the specified paper loaded? Or are
the settings incorrect?
Is the orientation of the specified
paper different from that of the
original?
—
—
Are there any originals left in the
document processor?
Can the specified copy functions be
used with the selected media type?
Did you select a media type that
cannot be stapled?
Did you select a media type that
cannot be punched?
Is stacking or sorting available for the
size of the loaded paper (11 × 17",
8 × 14", 5 × 8 ", A3, B4, A5R,
1/2 1/2 1/2
B6R, A6R, Folio, 8K)?
Is stapling available for the size of the
loaded paper? For further details,
refer to the document finisher
Operation Guide.
Is punching available for the size of
the loaded paper? For further details,
refer to the document finisher
Operation Guide.
Is the maximum page quantity for
stapling exceeded? For further
details, refer to the document finisher
Operation Guide.
Corrective Actions
Change the orientation of the original.
If you press the Start key without
changing the original, the original will
be copied at the current size.
Load the specified paper. Adjust any
settings that are incorrect.
Change the orientation of the original.
Remove originals from the document
processor, stack them uniformly, and
place them.
Remove originals from the document
processor, put them in the original
order, and place them.
Remove any originals from the
document processor.
Select another type of paper.
Select another type of paper.
Select another type of paper.
Change the paper size.
Change the paper size.
Change the paper size.
Reduce the number of pages to staple
to be maximum capacity or less.
Troubleshooting
Reference
Page
—
—
—
page 2-16
page 2-16
—
—
—
—
—
—
—
—
6-5